Time：2024-09-19 Views：1
Detailed explanation of square hole drilling techniques for customized cabinets
1、 Material preparation
To open a square hole, the following tools and materials need to be prepared:
1. Drill bit or electric hammer
2. Woodworking drill bit
3. Ruler and Pen
4. Steel ruler, wooden stick
5. Screw or steel nail
2、 Tool usage
1. Measure the size and position of the square hole using a steel ruler and ruler, and mark it with a pen.
2. Install the appropriate drill bit or electric hammer and slowly start drilling according to the marked position.
3. Use a woodworking drill bit to drill wood chips at the reduced position of the hole to prevent the hole from breaking.
4. Measure the depth of the hole with a steel ruler or wooden stick, control the depth of the hole to avoid drilling through the cabinet body.
5. Lock the positioning with screws or steel nails to prevent the drilling from shifting halfway.
Read recommendations:
Freestanding Bathroom Vanity Double Sink 60 Inch Wood High Quality Bathroom Furniture
Factory Customized Made Wardrobe Designs.304 Stainless Steel Cabinets
info@primahousing.com
EN
Home > 
